The convenience of the box can be attributed to the multi-compartment box machine

Fast food box to our life has brought very big convenience, so in the use of fast food box molding machine, should pay attention to what? The increase of the load and the length of the test run time are determined based on the running and matching of the gears of the big and small gears of the reduction gear. Do not operate at full load before the contact precision of tooth surface does not meet the design requirements.

The cooling and lubricating system should work normally during the test run. The temperature of main bearing, transmission bearing and reducer should be normal. Check and tighten all bolts again after loading 2/3 of the steel balls for 24-48 hours. The test run should be recorded carefully. The continuous operation time of empty operation shall be no less than 12-24 hours. Any problem found during operation shall be solved in time.

The empty operation test machine of snack box forming machine can be carried out normally, and the load test should be carried out in stages. Feeding shall be carried out according to the discharging condition during load operation to avoid unnecessary wear and damage of steel ball and cylinder lining plate. In our life, the fast food box brings convenience to our life. With the development of fast food industry, it also drives the fast food box to make rapid progress. Now we can not only eat delicious dishes in fast food restaurants, but also take home with the fast food box, which is really a very convenient choice.

Disposable fast food box, short for foam lunch box. White bubble boxes, favored by snack bars and small restaurants or restaurants for their cheapness, are ubiquitous in everyday life. So, what do you know about its security?

When choose and buy quick tableware, want to see mark above all whether complete, see a product next. The surface of the product should be smooth, without stains, impurities, scratches, cracks, no decolor, fading phenomenon, but also smell to see if there is a pungent taste and other peculiar smell. Important still want to see product mark, the product must indicate fastfood box to form machine manufacturer name or trademark, material, use the specification such as temperature, if the product has not heat resisting water, do not apply to microwave oven, cannot touch oily quality to wait for a requirement, also should mark.

Ruian Tianbang Machinery Manufacturing Co., LTD is specialized in the production of paper lunch box machine, multi-grid (sub-grid) lunch box machine, three-dimensional box forming machine, bento box forming machine, more related products please pay attention to www.tb-jx.com