Due to the particularity of the working environment, operators must have a comprehensive understanding of the performance characteristics and operation requirements of the lunch box machine when operating and using it. They should pay attention not to exceed the rated value. That is to say, when using the lunch box machine, they should carefully read and earnestly observe the safety instructions of the operation and use of the equipment!
Safety Instructions for the operation and use of multi-grid (dividing) lunch box Machine:
1. Strictly observe the safety operation rules of the lunch box machine, and wear labor protection articles as required
2. The upper and lower molds shall be cleaned and wiped clean before starting the fast-food box forming machine
3. Check whether there is any foreign body on the material holder, the material holder and the slide block. If there is any foreign body, clean it up
4. According to the thickness of the folded sheet, choose the appropriate die mouth, die mouth size is generally equal to or greater than 8 times the thickness of the sheet
5. The bending force of the workpiece can be obtained from the bending force number of sheet metal or the calculation formula of bending force. The bending force of the workpiece shall not be greater than 1000KN
6. When bending narrow sheet material, the working pressure of the system should be appropriately reduced to avoid damaging the mold
7. When adjusting the stroke of the slider, the adjustment quantity should be less than 100 to avoid damage to the machine
8. During screw return operation, the material in the barrel must be fully plasticized. If the temperature in the barrel is too low, the temperature of the barrel must be heated to the plasticizing temperature before proceeding, so as to avoid damage to the dining box machine
9. When bending, do not put your hands between the molds. Do not hold the narrow and small materials with your hands. Only one piece of material can be bent at a time, not many pieces at the same time. Check the oil level of oil tank, start the oil pump and check whether the hydraulic pipe and oil pump are abnormal
10. Folding plate should be placed in the middle of the mold, the machine should not be one-sided load, so as to avoid affecting the workpiece and the accuracy of the machine, such as some of the workpiece really need to work unilaterally, the load must not be more than 250KN, and must be both sides at the same time bending
11. Check the oil level of oil tank and start the oil pump to check whether the hydraulic pipeline and oil pump are abnormal
12. When the machine is working, it shall pay attention to observe the working condition of the machine. It is strictly prohibited to use the machine over load
During the operation and use of the lunch box machine, there are many potential safety hazards in the whole process from startup to shutdown. In order to improve the safety of the operation and use of the equipment, the safety instructions for the operation and use of the lunch box machine should be paid special attention to.
Ruian Tianbang Machinery Manufacturing Co., LTD is specialized in the production of paper lunch box machine, multi-grid (sub-grid) lunch box machine, three-dimensional box forming machine, bento box forming machine, more related products please pay attention to www.tb-jx.com
