April 1, 2019. Lunch box production line is the key equipment to crush the material after it is broken. It brings great convenience to our life, so what should we pay attention to when using bento box molding machine? The increase of the load and the length of the test run time are determined based on the running and matching of the gears of the big and small gears of the reduction gear. Do not operate at full load before the contact precision of tooth surface does not meet the design requirements.

The cooling and lubricating system should work normally during the test run. The temperature of main bearing, transmission bearing and reducer should be normal. Check and tighten all bolts again after loading 2/3 of the steel balls for 24-48 hours. The test run should be recorded carefully. The continuous operation time of empty operation shall be no less than 12-24 hours. Any problem found during operation shall be solved in time.

Load test can be carried out when the empty test machine is normal. The load test shall be carried out in stages. Feeding shall be carried out according to the discharging condition during load operation to avoid unnecessary wear and damage of steel ball and cylinder lining plate. In our life, the fast food box brings convenience to our life. With the development of fast food industry, it also drives the fast food box to make rapid progress. Now we can not only eat delicious dishes in fast food restaurants, but also take home with the fast food box, which is really a very convenient choice.

Disposable fast food box, short for foam lunch box. White bubble boxes, favored by snack bars and small restaurants or restaurants for their cheapness, are ubiquitous in everyday life. So, what do you know about its security?

When choose and buy quick tableware, want to see mark above all whether complete, see a product next. The surface of the product should be smooth, without stains, impurities, scratches, cracks, no decolor, fading phenomenon, but also smell to see if there is a pungent taste and other peculiar smell. It is important to see the product label, the product must indicate the manufacturer's name or trademark, material, use temperature and other instructions, if the product has heat-resistant water, does not apply to the microwave oven, can not touch the oil and other requirements, should also indicate.

Ruian Tianbang Machinery Manufacturing Co., LTD is specialized in the production of paper lunch box machine, multi-grid (sub-grid) lunch box machine, three-dimensional box forming machine, bento box forming machine, more related products please pay attention to www.tb-jx.com