The cleaning of the various moving parts of the multi-grid (sub-grid) lunch box machine, such as the reduction box, will have the iron filings or other impurities ground down from the gear, check the wear of the gear and bearings and record them. After using for a period of time, to carry out a comprehensive inspection of the multi box machine, check the tightness of all screws, and make a good record. Any major failure is caused by small problems are not dealt with in a timely manner at the beginning of the irreparable loss, the usual routine maintenance from a certain degree of procedures can reduce the occurrence of major problems.

The inner wall of the cooling water pipe attached to the dining box machine is easy to scale and easy to corrode and rust. Careful inspection should be done during routine maintenance. Excessive scale will block the pipeline and fail to achieve the cooling effect. Serious corrosion will cause water leakage. Focus on the inspection of the drive screw rotation of the DC motor brush wear, regular inspection of the motor resistance value is above the specified value.

Ruian Tianbang Machinery Manufacturing Co., Ltd. specializes in the production of multi-grid (sub-grid) lunch box machine. For more information, please pay attention to the official website www.tb-jx.com