What requirements should be followed in the running process of the paper lunch box machine? Paper lunch box machine in the use of the process, will inevitably appear various faults. Paper lunch box machine operation stability and equipment life, paper lunch box machine operators must strictly comply with the operating rules and requirements

Paper lunch box machine in the operation process, must comply with the following requirements:

1. Strictly abide by relevant operating rules and use occupational protective equipment when necessary.

2. Clean the upper and lower molds before starting the paper lunch box.

3. Check whether there are foreign bodies on the transport frame, limiter and slider, and clean the foreign bodies.

4, according to the thickness of the bending plate to choose the appropriate mold. The die size is usually equal to or greater than 8 times the sheet thickness

5. The bending force of the workpiece is calculated by the number of bending force or the calculation formula of bending force. The bending force of the workpiece is not more than 1000KN

6. When bending the narrow metal plate, the working pressure of the system must be properly reduced to avoid damage to the mold.

7, adjust the stroke of the slider, should be less than 100, so as not to damage the machine.

8. The clearance between upper and lower molds should be adjusted evenly

9. When bending over, do not reach into the mold room, nor hold long and narrow materials with your hands. You can only bend one piece of material at a time, not more than one at a time.

10, bending plate should be placed in the middle of the mold, the machine can not be installed on one side, so as not to affect the accuracy of the workpiece and the machine. When certain pieces do need to work on one side, the load should not exceed 250 kN and both sides should be bent at the same time.

11. Check the oil level in the oil tank, open the oil pump, and check the hydraulic pipeline. If the oil pump is abnormal, stop immediately, check the cause and eliminate it in time.

Ruian Tianbangmachinery Manufacturing Co., Ltd. specializes in the production of paper lunch box machine, multi-grid (sub-grid) lunch box machine, three-dimensional box forming machine, bento box forming machine, more related products please pay attention to the official website www.tb-jx.com